HD 3t, 5t, 10t, 16+10t overhead cranes have been successfully installed in our customer’s factory. We have cooperated with the customer for many times, and he is quite satisfied with our products and services. The European standard overhead cranes are well received by the customer due to the light weight, compact structure, low energy consumption and low wheel pressure.
AQ-NLH 10 ton overhead crane and semi gantry crane have been shipped to our customer site, and installed and commissioned. According to the client’s requirements, we design the most suitable crane system to accommodate the facility and lifting needs. The client is satisfied with our products and service.
AQ-NLH 32 ton European hoist double girder overhead crane was successfully installed, commissioned and put into use in our customer’s workshop. The crane is well received by the customer for its excellent performance, easy operation, high work efficiency, and low failure rate. This overhead crane is designed and manufactured according to the advanced European FEM standards. Under the conditions of meeting the requirements and relevant norms and standards, the weight of the crane steel structure is minimized by optimizing design methods. The hoist trolley adopts the ND type wire rope electric hoist trolley with a rated lifting capacity of 5 to 80t.
The European electric single girder underhung crane 5 ton produced by our company was successfully installed in the customer’s factory. The The main beam of this crane is European-style structure, and the electric hoist adopts European standard wire rope hoist.
Our experienced after-sales service engineer helped the UAE customer successfully install and commission the 5 ton electric hoist double girder gantry crane. This crane has simple structure, easy operation, convenient installation and maintenance, mostly used in factories, warehouses, material yards, and other places with low frequency of use.
LD 10 ton single girder overhead crane and LH 20 ton double girder hoist overhead crane are successfully installed at our customer site in Uzbekistan. We send well-experienced engineers to the work site to help install and commission the cranes and also offer staff training service to make sure that their staff operate the cranes correctly. Aicrane overhead cranes are of good quality, high reliability and competitive price, which are the main reasons why customers choose us. In addition, with a full range of after-sales service, we make sure our clients’ projects run smoothly.
Recently a 10t single girder truss gantry crane was shipped to Philippines. Here is the single girder gantry crane specification:
Lifting capacity: 10 ton
Lighting height: 6m
Lifting speed: 7m/min
Travelling speed: 20m/min
Due to truss structure, this gantry crane is ideal for various outdoor uses to withstand the attack of strong winds. It also features light dead weight, low cost, smooth and stable performance. The gantry crane can also be custom designed and built to suit your heavier or special lifting requirements. We offer various options and accessories to ensure you end up with the perfect solution. Get in touch with us any time if you have any question about overhead and gantry crane.
2 sets of single girder bridge crane from Dafang group are packaged and shipped to USA. This single girder crane is configured with electric chain hoist and will be used to lift glass.
Basically, the crane does not use I-beam, multi-purpose C steel and hanging pieces combinations. It is actually a kind of single beam suspension device. This type of crane has rather simple structure and limited load-bearing capacity, thus it generally utilizes chain hoist for lifting.
According to practical requirements of USA client, we suggest to configure the crane with electric lifting mechanism and manual travelling mechanism. As the situation of customer site is rather complicated, we also offer runway beam and rails to the client, making it convenient to install these cranes. Besides, 16 sets of hanging devices for roof are also added.
Single girder bridge crane specification: 0.5 ton lifting capacity, 5.486m span, 3m lifting height, 0.305m cantilever at both sides, 6.9/2.3m/min lifting speed, 208/60hz/3ph power supply, 1.2m hanging distance.
If you have any need for bridge crane, gantry crane, jib crane and electric hoist, welcome to contact us directly. We will design the best solution for your applications.
On 12th july 2017, 6 sets of monorail cranes are packaged in the factory and going to be shipped to Uzbekistan. In order to make it easy and convenient to install these cranes, we have marked each connection of crane components.
The total products purchased by Uzbekistan client include:
- 4 sets of wire rope electric hoist: 1 ton lifting capacity, 3.5m lifting height, 0.8/8m/min(double speed) lifting speed, 0.4/1.5kw lifting motor power, 2/20m/min (double speed) traveling speed, 0.2kw traveling motor power, overload protection device.
- 1 set of low headroom electric chain hoist: 3 ton lifting capacity, 12.2m beam length, 4.596m lifting height, 1.8/5.4m/min(double speed) lifting speed, 5/20 m/min (double speed) traveling speed, 0.75/0.18kw traveling motor power.
- 1 set of wire rope electric hoist: 3 ton lifting capacity, 12.2m beam length, 4.066m lifting height, 0.8/8m/min(double speed) lifting speed, 0.4/4.5kw lifting motor power, 2/20 m/min (double speed) traveling speed, 0.4kw traveling motor power, IP55, overload protection device, galvanized wire rope, anti-corrosion paint.
These monorail cranes with different configurations and sizes are for different uses. We work hard to offer the most suitable and affordable lifting solution to clients so as to create maximum value for their businesses. If you have any question, contact us online. We are more than happy to answer any question you have.